So you’ve got some noise and/or vibration data from a rotating machine, but no speed information. Surely that means you can’t analyse against speed or do any order analysis, right? Well, not quite!
The DATS Rotating Machinery option now comes with a tool to create speed v time data using your noise or vibration signals.
Watch the video to find out how…
A tutorial by James Wren (Prosig UK) on how to use the reference cursors in the DATS software to precisely measure features in your data.
James Wren (Prosig UK) steps through how to calibrate a strain gauge for use with a Prosig P8000 system.
A step-by-step introduction to creating order and waterfall plots from a time history and a tacho signal.
The P8012, P8020 & P8048 can all be fitted with the 8440 CAN-bus/GPS card. Setting up the P8000 to capture CAN-bus data is extremely simple. In the following video, James Wren demonstrates how it is done.
James Wren explains how to view 3-D visualizations using linear, logarithmic & dB scales.
James Wren explains how 3-D graphs can be transposed using Prosig’s DATS software.
Here are two videos on a relatively simple, but sometimes misunderstood procedure – how to calibrate microphones & accelerometers Continue reading [Video] How To Calibrate Microphones & Accelerometers
This is complete version of the video illustrating my recent article How To Measure Noise & Vibration In Rotating Machines. This video was previously published on the blog in 3 parts.
The video will be best enjoyed by selecting the 720p option and selecting full screen mode.